2002-03-28 2011-08-11 0-59 IETF Review 60-79 Reserved for Vendor Private Extensions 80-127 IETF Review 128-159 Reserved for Vendor Private Extensions 160-255 IETF Review 0 Reserved 1 Unspecified reason not covered by other failure codes. 2 Invalid request message. 3 The specified request is not implemented on this switch. 4 One or more of the specified ports does not exist. 5 Invalid Port Session Number. 6 One or more of the specified ports is down. 7 Invalid Partition ID. 8-9 Unassigned 10 General message failure. (The meaning of this failure code depends upon the Message Type. It is defined within the description of any message that uses it.) 11 The specified connection does not exist 12 The specified branch does not exist. 13 One or more of the specified Input Labels is invalid 14 One or more of the specified Output Labels is invalid. 15 Point-to-point bi-directional connection already exists. 16 Invalid service selector field in a connection management message. 17 Insufficient resources for QoS profile. 18 Insufficient resources. 19 Out of resources (e.g. memory exhausted, etc.). 20 Reservation ID out of Range 21 Mismatched reservation ports 22 Reservation ID in use 23 Non-existent reservation ID 24 ATM virtual path switching is not supported on this input port. 25 Point-to-multipoint ATM virtual path connections are not supported on either the requested input port or the requested output port. 26 Attempt to add an ATM virtual path connection branch to an existing virtual channel connection. 27 Attempt to add an ATM virtual channel connection branch to an existing virtual path connection. 28 ATM Virtual Path switching is not supported on non-ATM ports. 29 A branch belonging to the specified point-to- multipoint connection is already established on the specified output port and the switch cannot support more than a single branch of any point-to-multipoint connection on the same output port. 30 The limit on the maximum number of point-to- multipoint connections that the switch can support has been reached. 31 The limit on the maximum number of branches that the specified point-to-multipoint connection can support has been reached. 32 Cannot label each output branch of a point-to-multipoint tree with a different label. 33 Cannot add multi-point branch to bi-directional connection. 34 Unable to assign the requested Label value to the requested branch on the specified point-to-multipoint connection. 35 General problem related to the manner in which point-to-multipoint is supported by the switch. 36 Replace of connection is not activated on switch. 37 Connection replacement mode cannot be combined with Bi-directional or Multicast mode. 40 Cannot support one or more requested label ranges. 41 Cannot support disjoint label ranges. 42 Specialised multipoint labels not supported. 43 The transmit data rate of this output port cannot be changed. 44 Requested transmit data rate out of range for this output port. 45 Connection Replace mechanism not supported on switch. 46 Labels are still used in the existing Label Range. 47-59 Unassigned 60-79 Reserved for Vendor Private Extensions 80 Switch does not support different QoS parameters for different branches within a multipoint connection. 81-127 Unassigned 128-159 Reserved for Vendor Private Extensions 160-255 Unassigned